玻璃潤滑劑墊成型模設計
黨利1，韓敏2，馬勝龍2，馬遙力1，單晨晨1（1.鄭州航空工業管理學院航空工程學院，河南鄭州 450046； 2.河南職業技術學院，河南鄭州 475000）
摘要：針對玻璃潤滑劑墊制作和運輸過程中易出現的開裂問題，設計了1副鋼管擠壓的玻璃潤滑劑墊成型模，以避免轉移或烘干過程中玻璃潤滑劑墊出現開裂。該模具更換零件方便，可成形不同尺寸和形狀的玻璃潤滑劑墊以及控制其密度。
關鍵詞：難變形合金；管材擠壓；玻璃潤滑劑墊；烘干箱
中圖分類號：TG375.41 文獻標識碼：B
文章編號：1001-2168（2021）07-0056-03 DOI：10.16787/j.cnki.1001-2168.dmi.2021.07.013
Design of moulding die for glass lubricant pad
DANG Li1, HAN Min2, MA Sheng-long2, MA Yao-li1, SHAN Chen-chen1 (1.School of Aeronautical Engineering, Zhengzhou University of Aeronautics, Zhengzhou, Henan 450046, China; 2.Henan Polytechnic, Zhengzhou, Henan 475000, China)
Abstract: Aiming at the problem of cracking that easily occurs during the production and transportation of the glass lubricant pad, a moulding die for glass pad by steel tube extrusion was designed to avoid cracking of the glass lubricant pad during the transfer or drying process. The mould was convenient to replace parts, which could form glass lubricant pads of different sizes and shapes, and control the density of the glass lubricant pads.
Key words: hard-to-deform alloy; pipe extrusion; glass lubricant pad; drying box