鍛模相關國家標準和機械行業標準現狀及應用示例
郝媛1，周江奇2，蔣鵬1,4,5，張莉3，王沖3，侯惠敏1 （1.北京機電研究所有限公司，北京100083；2.上汽通用五菱汽車股份有限公司，廣西柳州 545005；3.桂林電器科學研究院有限公司，廣西桂林541004；4.北京機電研究所鍛壓產業研發中心，江蘇南通226600；5.中機鍛壓江蘇股份有限公司，江蘇南通226600）
摘要：我國現行310項模具標準中，鍛模標準共66項，其中國家標準3項，機械行業標準63項，從術語和通用技術要求、螺旋壓力機鍛模、機械壓力機鍛模、錘鍛模、平鍛模、切邊模、冷鍛模、緊固件冷墩模、回轉成形模9個方面介紹了鍛模相關的國家標準和機械行業標準。
關鍵詞：模具；鍛造；鍛模；標準體系
中圖分類號：TG315.2 文獻標識碼：A 文章編號：1001-2168（2021）06-0001-09 DOI：10.16787/j.cnki.1001-2168.dmi.2021.06.001
Current standardization situation of forging die and the application examples
HAO Yuan1, ZHOU Jiang-qi2, JIANG Peng1,4,5, ZHANG Li3, WANG Chong3, HOU Hui-min1 （1.Beijing Research Institute of Mechanical and Electrical Technology Co., Ltd., Beijing 100083, China; 2.SAIC GM Wuling Automobile Co., Ltd., Liuzhou, Guangxi 545005, China; 3. Guilin Electrical Equipment Scientific Research Institute Co., Ltd., Guilin, Guangxi 541004, China; 4.Forging Industry R&D Center of Beijing Research Institute of Mechanical and Electrical Technology (Haian), Nantong, Jiangsu 22660, China; 5.China Forging Machinery Co., Ltd., Nantong, Jiangsu 22660, China）
Abstract: There are 66 standards of forging dies among the existing 310 die & mould standards in China, including 3 national standards and 63 machinery industry standards. The 66 standards were introduced from 9 aspects of terms and general technical requirements, screw press forging dies, mechanical presses forging dies, hammer forging dies, upset forging dies, trimming dies, cold forging dies, cold upsetting dies for fasteners and rotary forging dies. Key words: die & mould; forging; forging die; standardization